双向收费岛模具厂家设置的形状多为锥形,就是为了起到车辆的防撞作用,而且锥形的构造可以保证有效的视野,对于收费安全工作起到一定的保障作用。常用收费岛模具的规格主要是以岛尾和岛头的规格,一般常见的有两种样式,一种是连体形式,一种是分体形式,这两种规格是目前收费岛预制件使用量较多的。因为高速路口设置的进出口收费站有限,所以往往每个站口使用一套模板就可以满足,如果工期不紧张的话,整条线路的收费岛这是需粪池模具 路缘石模具 唐山通风管道 塑钢电缆挂钩 钢纤维 钢制拍门 植绒机 铜雕佛像要5套模具就可以满足了。因为该模具体积大,搬运不方便,往往按照现场浇筑的方式进行生产,这样的话就节省了搬运预制块的时间。
The mold manufacturers of one-way toll island and two-way toll island
are concentrated in highway toll stations, mainly for import and export.
The shape set by the mold manufacturers of one-way toll island and
two-way toll island is mostly conical, which is to play the role of
anti-collision for vehicles. Moreover, the conical structure can ensure
an effective vision and play a certain role in ensuring the safety of
toll collection. The specifications of the commonly used toll Island
molds are mainly the specifications of the island tail and the island
head. Generally, there are two common styles, one is the connected form,
and the other is the split form. These two specifications are currently
used in a large number of toll Island prefabricated parts. Because the
toll booths at the highway intersection are limited, it is often
possible to use a set of templates at each station. If the construction
period is not tight, the toll island of the whole line needs five sets
of templates. Because of its large volume and inconvenient handling, the
mold is often produced in the way of on-site pouring, which saves the
time of handling precast blocks.